Below you will find an overview of workpieces that can be ground, eroded, and lasered using a WALTER tool processing machine. This list is not exhaustive and is constantly being expanded.
Your area of application is not listed? We would be happy to clarify for you whether and with which WALTER tool grinding, tool eroding, or laser machining machine your workpiece can be machined. Please fill out the contact form for this purpose.
Ball Nose Mill
These cutters are used for milling grooves and as copy cutters.
- Material: Carbide
Center Cutting End Mill
This cutter is used for milling deep grooves and for finishing.
- Material: Carbide
Conical Ball Nose Mill
These cutters are used for milling grooves and as copy cutters.
- Material: Carbide
Contour Tool
These cutters are used for edge processing. As well as milling grooves.
- Material: Carbide
Contour Tool
These cutters are used for edge processing.
- Material: Carbide
Double Radius Mill
These milling cutters are used for machining turbine blades.
- Material: Carbide
Drill Type W
Spiral drill bit type W for soft materials.
- Material: Carbide
Dual cut endmill
The special combination of left-hand twist (downcut) and right-hand twist (upcut) ensures clean cut edges on both the top and bottom of the workpiece. Dual cut endmills are therefore particularly suitable for contour milling of wood panels coated on both sides.
- Material: Carbide
Fir Tree Cutter
A fir-tree cutter is a specialized cutting tool used in machining applications to create fir-tree profiles, which are commonly found in turbine blades and disk
- Material: Carbide
Micro corner radius cutter
Area of application: 2D milling, 3D milling; Industry: Tool and mould making
- Material: Carbide
Micro full radius cutter
Area of application: 3D milling; Industry: Mould making
- Material: Carbide
Micro full radius milling cutter
Area of application: 2D milling, 3D milling; Industry: Tool and mould making
- Material: carbide
Micro full radius milling cutter
Area of application: for deep contours due to the neck length, 2D milling, 3D milling; Industry: tool and mould making
- Material: Carbide
Micro milling cutter
Area of application: for deep contours due to the neck length; Industry: mould making, tool making
- Material: carbide
Micro spiral drill bit with faceted grinding
Area of application: e.g. circuit boards; industry: semiconductor industry
- Material: carbide
Micro step drill
Area of application: e.g. model making; industry: mould making, model making, mechanical engineering
- Material: carbide
Micro torus cutter with chamfer
Area of application: Tool and mould making
- Material: Carbide
PCD ball nose mill
PCD full radius milling cutters are mainly used for the precise machining of non-ferrous metals, fiber-reinforced plastics, graphite, and other abrasive non-metals. Areas of application include the automotive industry, mold and tool making, mechanical engineering, and aerospace.
- Material: Polycrystalline diamond (PCD)
PCD compression router
Area of application: Components made of wood and fiber-reinforced materials are processed.
- Material: Polycrystalline diamond (PCD)
PCD compression router
Area of application: Components made of wood and fiber-reinforced materials are processed
- Material: Polycrystalline diamond (PCD)
PCD compression router
PCD Compression Router is primarily used for the precise and economical machining of non-ferrous metals, wood, plastics, and composite materials.
- Material: Polycrystalline diamond (PCD)
PCD corner radius mill
PCD corner radius milling cutters are mainly used for machining non-ferrous metals such as aluminum and copper, as well as graphite and fiber-reinforced plastics.
- Material: Polycrystalline diamond (PCD)
PCD counter sink
Area of application deburring edges and countersinking holes.
- Material: Polycrystalline diamond (PCD)
PCD drill form E
Area of application: for wood and composite materials. The advantage when drilling lies in the centering tip
- Material: Polycrystalline diamond (PCD)
PCD drill with chamfer
PCD drills with chamfers are primarily used in large-scale production to machine non-ferrous metals, composite materials (such as CFRP, GFRP), wood, and plastics. The chamfer at the drill tip serves to stabilize the drill entry and ensure a clean, precise start to the drilling process.
- Material: Polycrystalline diamond (PCD)
PCD end mill with chamfer
PCD milling cutters with chamfers are suitable for the precise machining of non-ferrous metals such as aluminum (especially with low silicium content), brass, and zinc, as well as for abrasive plastics and graphite, as the high hardness of polycrystalline diamond (PCD) enables a long service life and high surface quality at high machining speeds, which are crucial for large-scale production in industries such as the automotive and aerospace industries.
- Material: Polycrystalline diamond (PCD)
PCD end mill with chamfer
PKD milling cutters are mainly used for machining non-ferrous metals, composite materials such as fiber-reinforced plastics and graphite, especially in cases of high wear or abrasive materials that push conventional tools to their limits.
- Material: Polycrystalline diamond (PCD)
PCD facet drill
PCD drills are used for abrasive and difficult-to-machine materials such as aluminum alloys, fiber-reinforced plastics, graphite, and sintered materials. Advantage: long service life.
- Material: Polycrystalline diamond (PCD)
PCD profile insert
Area of application: Face milling; profile plates are inserted into a milling holder.
- Material: Polycrystalline diamond (PCD)
PCD profile tool
These cutters are used for edge processing. Area of application in cell phone manufacturing
- Material: Polycrystalline diamond (PCD)
PCD profile tool
These cutters are used for edge processing.
- Material: Polycrystalline diamond (PCD)
PCD profile tool
These cutters are used for edge processing.
- Material: Polycrystalline diamond (PCD)
PCD profile tool
These cutters are used for edge processing.
- Material: Polycrystalline diamond (PCD)
PCD profile tool with chip breaker
Area of application: Components made of fiber-reinforced materials are processed
- Material: Polycrystalline diamond (PCD)
PCD profile tool with chip breaker
These cutters are used for edge processing. Area of application: for milling long-chipping materials.
- Material: Polycrystalline diamond (PCD)
PCD reamer
PCD reamers are used in areas where maximum precision and surface quality are required, especially when machining non-ferrous metals such as aluminum (including those with high silicon content), magnesium, and titanium, as well as plastics and composite materials.
- Material: Polycrystalline diamond (PCD)
Reamer
With the help of reamers, pre-drilled holes can be reworked with high precision and thus reamed to the desired nominal size.
- Material: Carbide
Thread Milling Cutter
Thread milling cutter for ISO threads. This is used for milling internal threads.
- Material: Carbide